Battery Check - Olympus CAMEDIA D-540ZOOM Manual Básico

Memory gauge
The memory gauge lights up when you take a still picture. While the gauge is
lit, the camera is storing the picture on the card.The memory gauge indication
changes as shown below depending on the shooting status.
The indication is not displayed during movie recording.
Before shooting
(Gauge is off)
* The memory gauge indication may not be displayed depending on the record mode
you selected.
En

Battery check

If the remaining battery power is low, the battery check indication on the
monitor changes as follows while the camera is turned on.
Lit (Green)
(The indicator turns
off after a while.)
Remaining power
level: high.
8 En
*
Shoot
One picture
taken
(Lit)
Blinks (Red)
Remaining power level: low.
Prepare new batteries.
*
Shoot
Two or more
taken
(Lit)
Remaining power level:
exhausted.
Replace with a new batteries.
Shoot
Wait
No more pictures can
be taken (Fully lit).
Wait until the gauge
returns to the status
on the left to take the
next shot.
"BATTERY EMPTY"
is displayed.