SPORTSTECH IT300 Manual De Instrucciones página 31

Foot rest adjustment
Before use, adjust the foam leg rollers (M2) on the foot rest according to the following diagrams so
that your legs are not squeezed but still have sufficient support. To do so, pull the leg tube adjustment
knob (D2), set the desired distance and then refasten the leg adjustment knob.
Incline adjustment
You can set the incline angle between 60° and -90° as required. To do so, simply loosen the brake by
pulling the lever (O). Set the desired incline of the table and refasten the brake by pushing the lever (O).
!
Make sure that neither your fingers nor clothing get wed-
ged between the frame while inverting!
O
31
L
D2
EN