Ec Declaration Of Conformity - Chicago Pneumatic CP81020 Manual Del Usuario

English
EN
5. Maintenance instruction
WARNING
• Keep the service jack clean and well lubricated to prevent foreign matter from entering the system. If the jack has been exposed to rain,
snow, sand, or grit, it must be cleaned before it is used.
• Store the jack, with pistons completely retracted, in a well-protected area where it will not be exposed to corrosive vapors, abrasive dust, or
any other harmful elements.
• Periodically check the condition of the product.
• Store the product in dry and non-corrosion environment.
• Owners and/or operators should be aware that repair of this equipment may require specialized knowledge and facilities. It is
recommended that an annual inspection of the product be made by a manufacturer's or supplier's authorized repair facility and that any
defective parts, decals, or safety labels or signs be replaced with manufacturer's or supplier's specified parts. A list of authorized repair
facilities is available from the manufacturer or supplier, please call them for help.
• Any product that appears to be damaged in any way, is found to be worn, or operates abnormally SHALL BE REMOVED FROM SERVICE
UNTIL REPAIRED. It is recommended that necessary repairs be made by a manufacturer's or supplier's authorized repair facility if repairs are
permitted by the manufacturer or supplier.
• Only attachments and/or adapters supplied by the manufacturer shall be used.

6. EC Declaration of conformity

We : CHICAGO PNEUMATIC Tool Co. LLC 1800 Overview Drive Rock Hill, SC 29730 - USA
Declare that the product(s):
Serial Number: 00001 - 99999
Machine type(s): Bottle Jack Origin of the product: China
is in conformity with the requirements of the council Directives on the approximation of the laws of the Member States relating : to
"Machinery" 2006/42/EC (17/05/2006)
applicable harmonised standard(s) : EN 1494:2000 + A1:2008
Name and position of issuer: Pascal Roussy ( R&D Manager)
Place & Date: Saint-Herblain, 05/01/2016
Technical file available from EU headquarter. Pascal Roussy R&D manager CP Technocenter 38, rue Bobby Sands - BP10273 44800 Saint
Herblain - France
The design has been validated according to: ASME PASE-2014
Copyright 2016, Chicago Pneumatic Tool Co. LLC
All rights reserved. Any unauthorized use or copying of the contents or part thereof is prohibited. This applies in particular to trademarks, model
denominations, part numbers and drawings. Use only authorized parts. Any damage or malfunction caused by the use of unauthorized parts is
not covered by Warranty or Product Liability.
Original Instructions
CP81020/CP81030/CP81050/CP81080/CP81120/CP81200/CP861300/
• Do not use damaged/deformed product. If abnormal noise or vibration occurs, stop use
immediately, then inspect and ask manufacturer for help.It is recommended that this inspection be
made by a manufacturer's or supplier's authorized repair facility.
• The greatest single cause of failure in hydraulic units is dirt.
CP81020/CP81030/CP81050/CP81080/CP81120/CP81200/CP861300/CP81121/CP81122/CP81201/CP81502
CP81121/CP81122/CP81201/CP81502
Bottle Jack