Attaching The Mirror - Munchkin brica Cruisin' Baby In-Sight Manual Del Usuario

How to Use

ATTACHING THE MIRROR

ON BACKSEAT HEADREST
1. Raise backseat headrest and slide clamp
underneath.
2. Wrap adjustable stands over top of headrest.
3. Bend clamp upward to conform to headrest.
4. Attach strap's clip to D-ring.
5. Lower headrest to secure mirror in place.
6. Tighten strap and adjust mirror to desired
angle so that the child is visible to the driver
in the vehicle's rearview mirror.
ON BENCH SEAT
1. Position mirror on top of seat back.
2. Bend clamp to conform to top of seat back.
3. Squeeze clamp firmly to secure mirror in place.
4. Unfasten adjustable stands from clamp and tilt
mirror to desired angle so that the child is visible
to the driver in the vehicle's rearview mirror.
NOTE: If a tether anchor is accessible and not in use
by a child safety seat, attach strap's clip to tether
anchor and tighten strap. This will help increase the
stability of the mirror. If you own a minivan, station
wagon or SUV, you may need a tether extender to
reach the tether anchor. Please visit munchkin.com
to purchase a tether extender.
10
D-Ring
Clip
Strap
Adjustable
Stands
Clamp
Adjustable
Stands
Fastener
Clamp
USING TETHER ANCHOR
IMPORTANT: Do not attach this mirror to your
vehicle's tether anchor if a child safety seat is using
the same anchor.
1. Position mirror on seat back in front of tether
anchor location.
2. Insert clamp between seat back and rear deck
of your vehicle.
3. Bend clamp to conform to shape of seat back.
4. Attach strap's clip to vehicle tether anchor
and tighten strap.
5. Unfasten adjustable stands from clamp and tilt mirror
to desired angle so that the child is visible to the
driver in the vehicle's rearview mirror.
NOTE: If you own a minivan, station wagon or SUV, you may need a tether extender
to reach the tether anchor. Please visit munchkin.com to purchase a tether extender.
ON FRONTSEAT HEADREST
IMPORTANT: This method is used for mounting
mirror to backside of front seat to entertain forward-
facing children.
1. Raise headrest and slide clamp underneath.
2. Wrap adjustable stands over top of headrest.
3. Bend clamp to conform to shape of seat back.
4. Attach strap's clip to D-ring.
5. Lower headrest to secure mirror.
6. Tighten strap and adjust mirror so that the child
can see themselves.
How to Use
Adjustable Stands
Fastener
Clip
Tether Anchor
Clamp
Clip D-Ring
Strap
Adjustable
Stands
Clamp
11