Display Messages And Their Meanings - BRAVILOR BONAMAT FreshOne Manual De Instrucciones

8.3

Display messages and their meanings

Possible cause:
Error 1 N/A to this application.
Error 2 Faulty reference of the boiling point.
Error 3 Leak in the water system.
Faulty reference of the boiling point.
Water in the boiler has boiled due to a failure
in the temperature sensor.
Error 4 Heating element defect.
Error 5 Photoelectric cell defect.
Wear or breach of a selector component.
Water selector motor defect.
Error 6 Tap is closed.
Water hose is twisted.
No pressure in the water system.
22
version 1.0
DISPLAY MESSAGES
N/A to this application.
Redetermine the boiling point; by setting the
temperature to zero the boiling programme
can be started.
Call in service.
Call in service.
Call in service.
Call in service.
Call in service.
Call in service.
Call in service.
Open the tap.
Take the twist out of the hose.
Check other draw−off points in the building
for pressure and investigate the cause.
Actions:
ECopyright Bravilor Bonamat B.V.