Prepare Measurement; Voice Function - Sanitas SBM 19 Instrucciones Para El Uso

7. Number of memory space
8. Inflate/deflate arrow
9. ‚Change battery' icon
10. Cardiac arrhythmia icon
11. WHO classification

4. Prepare measurement

Inserting battery
• Remove the battery cover
from the back of the monitor.
• Insert four AA 1.5 V alkaline
batteries. making absolutely
sure that you insert them with
the correct polarity as marked.
Never use rechargeable bat-
teries.
• Replace the battery cover carefully.
If the battery change „
measurement is no longer possible and you must replace
all the batteries. Once batteries have been removed from
the device, the time must be reset. Any measurement re-
sults that have been stored are however retained.
Used batteries do not belong in the household waste. You
are legally obliged to dispose of the batteries. Dispose of
them via your specialist electrical supplier or local collec-
ting point for recyclable waste.
Note: Batteries containing pollutant substanc-
es are marked as follows: Pb = Battery con-
tains lead, Cd = Battery contains cadmium, Hg
= Battery contains mercury.
" is continuously illuminated,
Any measurement re-
Setting date and time
It is vital to set date and time. Only in this way is it possible
to save and subsequently retrieve your measured values
with the right date and time.
Time is shown in 24 hour format.
Note: If you hold down ‚MEM', you can set the values
faster.
• Press ‚START/STOP' and ‚MEM' simultaneously. The
month starts flashing. Using the ‚MEM' button, set the
month 1 to 12 and confirm with ‚START/STOP'.
• Set the day, hour and minute and confirm in each case
with ‚START/STOP'.

Voice function

You can set the voice function in the switched off state. The
device offers 3 languages (English, German, Spanish). The
device is set to German on delivery. To change the langua-
ge selection, press and hold down the ‚MEM' button until
the desired language appears in the display.
L1-English
L2-German
L3-Spanish
L0-Language off
The device changes the language automatically if you keep
the ‚MEM' button pressed. You are informed of the langu- ‚MEM' button pressed. You are informed of the langu- button pressed. You are informed of the langu-
age acoustically each time it changes. Release the ‚MEM'
button to confirm your desired language.
Volume adjustment: After selection of the language, the
bar graph of the WHO classification in the right part of the
display flashes and displays the current volume. You can
change the volume automatically by pressing and holding
12