Correct Measurement Position - Sanitas SBM 06 Instrucciones Para El Uso

7. Correct measurement position

lt is extremely important for the measured values, that the cuff is at the same
height of the heart. Higher or deeper position will give deviations from the true
value.
Measurement while sitting down:
a Place your elbow on a table or other object.
b Use the armrest to position the arm so that
the pressure cuff is at the same height as the
heart.
c Relax your hand with the palm facing up. Do
not talking or moving during measurement.
8. Description of display mark
Display mark
Replace
batteries
Condition/Cause
Mark appears in the
measurement condition
when pulse is detected.
Appears when the battery
voltage is excessively low.
Action
Measurements in progress
remain quiet.
Replace all two batteries by
new ones. Insert the batteries
at correct positions beware of
the +/- directions.
1
Figure No. 5