Cleaning - Silvercrest SLE 265 B3 Instrucciones De Uso

Cleaning

CAUTION
Possible damage to the appliance.
► Do not allow any liquids or moisture to get into the appliance.
► To avoid irreparable damage to the appliance, never immerse it in water.
► Always remove the mains plug from the mains power socket before cleaning
the appliance.
► Do not use aggressive or abrasive cleaning agents, as these may corrode
the surface of the casing.
► Do not clean the water tank
damaged.
♦ If required, wipe the casing with a slightly damp cloth.
♦ Remove the water tank
inside and out, before replacing it.
♦ In order to clean the inside of the water tank
To do this, tip the grip backwards until the pins on the grip line up with the
groove on the water tank
on both sides out of the groove (see figure 5).
Fig. 5
♦ Now remove the lid upwards from the water tank
♦ Assembly is carried out in the reverse order.
♦ We recommend that you clean the water tank
to prevent the build-up of mould and bacteria. To do this, fill the water tank
with lukewarm water, adding a standard detergent. Rinse repeatedly with
lukewarm water. In addition, disinfection is recommended following clean-
ing. To do this, use a standard, alcohol-based disinfecting agent or high-
proof alcohol. Both substances are completely harmless if rinsed repeatedly
with lukewarm water afterwards.
■ 44
GB│IE
│
4
in a dishwasher. Otherwise, it will be
4
and pour out the water. Dry it thoroughly, both
4
4
. You can now remove the grip by pushing it
4
, you must remove the lid.
4
.
4
regularly every two weeks
SLE 265 B3
4