Silvercrest SLE 265 B3 Instrucciones De Uso página 50

Fault Possible cause
The air inlet or air outlet
aperture is contaminated or
obstructed.
The appliance
is producing The room's windows and doors
no or too little are open.
condensate.
Is the appliance running in the
AIR CLEAN programme? Dehu-
midification is not taking place.
The air ejected
Heat exchange process
is warm.
The error code
E 1 is flashing on
Temperature sensor error
15
the display .
The error code
E 2 is flashing on
Humidity sensor error
15
the display .
NOTE
► If the solutions presented above do not resolve the problem, please contact
Customer Service (see section Service).
SLE 265 B3
Remedy
Ensure that the air inlet and air outlet
apertures are clean and free of
obstructions.
Close the windows and doors.
Select a different programme, e.g.
AUTOMATIC.
This is a normal feature of the appli-
ance.
Contact the Customer Service depart-
ment.
Contact the Customer Service depart-
ment.
GB│IE
47 ■
│