Turning On The Power And Registering The Cameras - Sony NSR-S10 Manual De Instalación

Turning on the power and registering
the cameras
After turning on the NSR, you can begin monitoring immediately if you register the cameras
automatically.
Note
The power comes on automatically when the power cord of the AC adapter is plugged into
the power outlet. After the NSR has been turned off either by a screen-based operation or by
the power switch on the rear panel, the power can be turned back on by pressing the power
switch.
1
Plug the power cord of the AC adapter into the power outlet.
The unit beeps, and the POWER LED on the front panel lights green.
After a minute or two, the message "System Starting, Please Wait..." appears on the
monitor.
The "Main" screen appears after the unit starts up.
Notes
• The user ID and password for logging in to the "Main" screen are as follows.
Default user ID: admin
Default password: admin
• For details how to change the auto login setting, refer to "Settings Related to the
System" in the User's Guide (PDF).
18

Turning on the power and registering the cameras