Maintenance: Removing And Replacing The Brush Roll - Hoover REACT Manual Del Usuario

Maintenance: Removing and Replacing the Brush Roll

1
3
WARNING
Risk of personal injury – the brush roll may suddenly restart. Turn power OFF
and remove the battery before cleaning or servicing the brush roll.
Remove Powered Nozzle from Reach
Wand. Turn the Powered Nozzle upside
down. Slide the Brush Roll Release
Button.
Clear any threads or hair from both
ends of the brush roll and any dirt
or debris inside the housing of the
Powered Nozzle.
Lift the end of brush roll to remove
from the Powered Nozzle.
2
Re-fit the brush roll into the housing.
4
21