Mounting The Wall Bracket - Hoover REACT Manual Del Usuario

Mounting the Wall Bracket

First, fully assemble the vacuum but do not attach the battery.
Install the Wall Bracket arm
to the Wall Bracket. Hold the
vacuum against the wall.
Position the Wall Bracket
behind the Handheld so that
the hook holds the vacuum.
TIP: The Floor Nozzle must be flat
1
on the ground for proper wall
mounting.
Set the vacuum aside. Mark the
Wall Anchor locations. Install
the anchors and screw the Wall
Bracket to the wall.
IMPORTANT: Use BOTH screws to
mount the Wall Bracket to wall.
2
Slide Tool Storage Part into the
slot on the Wall Mount Bracket
until it locks into place.
3
9