Operation - Klarstein 10030714 Manual Del Usuario

Ocultar thumbs Ver también para 10030714:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Before switching on
• Make sure that it has been installed by a suitably qualified person, as per the information contained in the
installation instructions.
• After delivery, wait for approximately 24 hours before connecting the appliance to your mains supply. This
will allow any refrigerant gasses that may have been disturbed during the transportation process to settle.
• The outside of the appliance and the removable accessories contained within it, should be cleaned with a
solution of liquid detergent and water.
• The interior of the appliance should be cleaned with a solution of sodium bicarbonate dissolved in luke-
warm water. The interior and accessories should be thoroughly dried, after the cleaning process has been
completed.
• There can be an odour when you first switch on the appliance. It will lessen as the appliance starts to cool.
During first use
• When you use the wine cooler for the first time or restart the appliance after it has been turned off for a
long time, there could be a few degrees variance between the temperature you select and the one indi-
cated on the LED display. This is normal and it is due to the length of activation time. Once the wine cooler
has been running for a few hours everything will be back to normal.
• When you first switch on the appliance, the compressor will run continuously until the wine cooler reaches
a cool enough temperature.
• During this period of time, you should try not to open the door frequently or place bottles inside of the
appliance.
• If the unit is switched off or unplugged, you must allow at least 5 minutes before restarting the appliance
or reconnecting it to your mains supply.
Loading the wine cooler
• Your appliance is ideally suited to store 0.75 litre Bordeaux style wine bottles. Whilst it can store larger
bottles, you must make sure that they do not prevent the door from shutting properly.
• Always check that you can close the door without it fouling on a wine bottle, before shutting it.
• When loading several bottles of wine at once, it will take longer for the appliance to cool the individual
bottles.
• As many bottles may differ in size and dimensions, the actual number of bottles you are able to store may
vary.
• The maximum storage number is based on standard 0.75 litre Bordeaux style wine bottles.
• You can place 54 standard bottles in the wine cabinet with 11 bottles on each full size shelf and 6 bottles
on each half size shelf.
17

Operation

Publicidad

Tabla de contenido
loading

Tabla de contenido