Klarstein Botella 166 Uno Manual Del Usuario página 27

Switching on the appliance and setting the temperature
• To switch the appliance on, press the button
appliance off again, press and hold the power button for 5 seconds.
• When you press the TEMPERATURE SET BUTTONS for the first time, the LED display
will indicate the factory preset temperature.
• Press the TEMPERATURE SET BUTTONS
or descrease 1°C oR 1°F until the temperature you want.
• To see the set temperature of each zone at any time, touch the buttons
set temperatures temporarily flash on the display for about 5 seconds.
Note: When the temperature is changed, the compressor works harder to reach the
required temperature. And the compressor will work slowly and even stop working
when the set temperature is reached.
The humidity control box (optional)
The wine refrigerator is equipped with a system to maintain the correct humidity level.
• Fill the small plastic reservoir (humidity box) ¾ full with water and replace. The
humidity box is located on the top shelf and secured by runners.
• Check the water level regularly and refill as necessary.
Note: Please ensure the reservoir is positioned correctly on the runners to avoid the
possibility of water spillage.
and hold 5 seconds, turn the
or once. The display will increase
or ,
EN
27