Flex FX1151 Manual Del Operador página 10

WARNING
performing any assembly or adjustments, or
changing accessories. Such preventive safety
measures reduce the risk of starting the tool
accidentally.
TO ATTACH/DETACH BATTERY PACK
Lock the variable-speed trigger switch "OFF"
on the tool by placing the direction-of-rotation
(forward/center-lock/reverse) selector in the
center position before attaching or detaching the
battery pack.
To attach the battery pack:
Align the raised rib on the battery pack with the
grooves in the tool, and then slide the battery
pack onto the tool.
NOTICE: When placing the battery pack onto
the tool, be sure that the raised rib on the
battery pack aligns with the groove inside
the tool and that the latches snap into place
properly. Improper attachment of the battery
pack can cause damage to internal components.
To detach the battery pack:
Depress the battery-release button located
on the front of the battery pack, to release the
battery pack. Pull the battery pack out and
remove it from the tool.
WARNING
Therefore, the direction-of-rotation (forward/
center-lock/reverse) selector should always
be locked in the center position when the
tool is not in useor while carrying the tool at
your side.
WARNING
accessories not recommended for use with
this tool. Any such alteration or modification is
misuse and could result in a hazardous
condition leading to possible serious injury.
Detach the battery pack
from the tool before
(FIG. 2)
Battery tools are always in
operating condition.
Do not attempt to modify
this tool or create
ASSEMBLY
Fig. 2
Battery-
Release Button
Battery Pack
-10-