Flex FX1151 Manual Del Operador página 14

Taladro atornillador / taladro de percusión
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

FUNCTION-SELECTION RING (MODEL
FX1251 ONLY) AND TORQUE-ADJUSTMENT
RING (FIG. 11 AND 12)
WARNING
when the tool is running.
Your tool is equipped with a function-selection
ring (Model FX1251 only) and torque-
adjustment ring for various applications. Move
the ring depending on the requirements of your
task.
The proper setting depends on the job and the
type of bit, fastener, and the material you will
be working on. In general, use greater torque
for larger screws. If the torque is too high, the
screws may be damaged or broken.
Model FX1151 (Fig. 11):
Your tool features 23 torque settings and 1
driving setting. Output torque will increase as
the ring is rotated from 1 to 23.
Adjust the torque by rotating the torque-
adjustment ring. The higher the torque setting,
the more force the tool produces to turn an
object.
The Drill setting
to permit drilling and other heavy-duty
applications.
Model FX1251 (See Fig. 12):
Your tool features 23 torque settings, 1 drilling
setting and 1 hammer drilling setting. Output
torque will increase as the ring is rotated from
1 to 24.
The Drill setting
permit (non-hammer) drilling and other heavy-
duty applications.
The Hammer Drilling setting
clutch to permit hammer drilling only.
NOTICE: Do not use the hammer drilling
setting for drilling in wood, metal, ceramic, and
plastic to prevent the drill/screw bit from being
damaged.
Do not adjust the torque
or function-selection ring
will lock the clutch
will lock the clutch to
will lock the
Fig. 11
Torque-Adjustment
Ring
Fig. 12
Function-Selection Ring
Torque-Adjustment
Ring
-14-

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Fx1251

Tabla de contenido