Specifications - Ikegami ISD-A21 Manual De Instrucciones

7. Specifications

(1) Imaging device:
(2) No. of effective pixels:
(3) Scanning system:
(4) Sync system:
(5) Video output:
(6) Resolution:
(7) S/N ratio:
(8) Minimum subject illumination:
(9) WDR function:
(10) AGC:
(11) Electronic sensitivity up:
(12) White balance:
(13) Noise reduction:
(14) Monitor selection:
(15) Day/night switching:
(16) Auto iris function:
(17) Camera ID:
(18) Local setup:
(19) Remote setup:
1/3-inch DPS CMOS sensor
Approx. 390,000 pixels, 720(H) x 540 (V)
NTSC: 525 TV lines/59.94 Hz (60 Hz with Line-Lock ON),
2 : 1 interlace
INT/LINE-LOCK (phase adjustable) (Line-lock not usable
where the power frequency and the camera's vertical
frequency are different from each other or when the
camera is DC-driven)
VBS 1.0 Vp-p/75 ohms
Horizontal; 520 TV lines
(in high-resolution mode, at rated illumination)
Over 50 dB/rms (in normal mode, AGC OFF, Detail OFF
and Weighting ON )
In color mode;
1.0 lux/F1.4 (video output 50%, HYPER-AGC)
In B/W mode;
0.2 lux/F1.4 (video output 50%, HYPER-AGC)
0.1 lux/F1.4 (video output 25%, HYPER-AGC)
Variable at 36 levels
ON (AGC, HYPER-AGC)/OFF (LOW, MID, HIGH) selectable
Automatic (up to 32 times: interlocked with AGC mode)
ATW/ATWex/AWC/MANU selectable
ON/OFF switchable
CRT/LCD switchable
Automatic/Manual switchable
Compatible with VIDEO iris and DC iris
(switchable, with DC iris level adjuster)
Up to 24 characters (alphanumeric and symbols)
Selectable and adjustable with on-screen display using
pushbuttons; camera ID, AGC ON/OFF, ATW/AWC/MANU
selection and adjustment, LL/INT switching, phase
adjustment, wide dynamic range level, iris level, spot area
setting, electronic sensitivity up ON/OFF, DNR ON/OFF,
monitor selection CRT/LCD, detail level, chroma level,
day/night mode switching and level
Possible (control with RCU-701/RCU-801 or RS-485)
Same presettable items as with the local setup
E-16