Specifications - Ikegami ISD-A31 Manual De Instrucciones

10. Specifications

(1) Image Sensor:
(2) Pixel Number:
(3) Scanning system:
(4) Sync system:
(5) Video output:
(6) Resolution:
(7) S/N ratio:
(8) Minimum object illumination:
(9) Wide Dynamic Range:
(10) AGC:
(11) Electronic Sensitivity Control:
(12) White Balance Control:
(13) Digital Noise Reduction:
(14) Optimum Monitor:
(15) Camera ID:
(16) Local Setup:
1/3-inch Pixim DPS CMOS sensor
Approx. 390,000 pixels, 720(H) x 540(V)
NTSC; 525 TV lines/60 Hz, 2 : 1 interlace
INT/LINE-LOCK (phase adjustable)
(Line-lock not usable where the power
frequency and the camera's vertical
frequency are different from each other or
when the camera is DC-driven)
VBS 1.0 Vp-p/75 ohms
Horizontal; 480 TV lines
Over 50 dB/rms (AGC OFF, Detail OFF)
0.025 lux/F1.4 (Elec.Sens.Up x 32)
0.8 lux/F1.6 (in Hyper AGC mode)
Built-in and Variable in 36 levels
ON (AGC, HYPER-AGC)/
OFF (LOW, MID, HIGH) selectable
Built-in, On or Off Selectable S/N, STD or
Move, or Off Maximum 32 times
ATW/ATWex/AWC/MANU, Selectable
Built-in, On or OFF, Selectable
Output selection;
Built-in, CRT or LCD types, Selectable
1 Line, up to 24 characters
(alphanumeric and symbols)
Selectable and adjustable with on-screen
display using a supplied setup adaptor for;
camera ID, AGC ON/OFF, ATW/AWC/
MANU selection and adjustment, Sync LL/
INT switching, and phase adjustment, Wide
Dynamic Range level, Iris Level, BLC Spot
area setting, Electronic Sensitivity Up ON/
OFF, DNR ON/OFF, Monitor output
selection in CRT/LCD, Detail level, Chroma
level, P.Mask setting
E-23