OBJ_BUCH-0000000262-001.book Page 17 Thursday, June 30, 2016 3:57 PM
en
17
Replacing the die (ABLK18-1.3TE (**)/
Fig. 8
ABLK18-1.3CSE (**)) (figure 8).
Loosen the union nut, then pull out the die.
Remove the die and mount a new one.
Tighten the union nut.
Die
Union nut
Replacing the die
Fig. 9
(ABLK18-1.6E (**)) (figure 9).
Die
Loosen the screw, then pull out the die.
Remove the die and mount a new one.
Tighten the screw.
Screw