Intended Use - Trotec BS15 Manual De Instrucciones

Intended use

The noise meter is a digital measurement device for measuring the
noise level in units of decibel (dB).
The noise level meter is for measuring noise levels of sources in the
intensity range 40 to 130 dB. It is an appliance for checking noise
sources or for simple measurements of environment noise.
The measurements and the instantaneous units/functions are
shown digitally on the large four-digit LC-Display (Liquid-Crystal-
Display). In unfavourable light conditions the display is illuminated
automatically.
The maxima or minima can be recorded.
In order to suppress disturbing wind noise, an attachable wind deflec-
tor is enclosed, which does not affect the noise level measurement.
G
A 9 V block battery (type 1604A) is required for operation.
Measurements must not be carried out under unfavourable ambient
conditions. Unfavourable ambient conditions are:
• Wet conditions or high air humidity
• Dust and flammable gases, vapours or solvent,
• Thunderstorms or conditions such as strong electrostatic fields etc.
Any use other than described above is not allowed and can damage
the product. No part of the product may be modified or rebuilt!
The safety instructions must be observed thoroughly!
Operating manual – Digital sound level meter
B - 3