Use For The Intended Purpose - Trotec MultiMeasure BASIC Manual De Instrucciones

Ocultar thumbs Ver también para MultiMeasure BASIC:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 18
• Do not carelessly leave the packaging material lying around; it could
become a dangerous toy for children.
• If it is assumed that the appliance can no longer be used without
a hazard, it should be switched off and secured against accidentally
being switched on again. It may be assumed that operation without
a hazard can no longer be guaranteed if the appliance shows visible
signs of damage, if the appliance no longer works, after long periods
of storage under unfavourable conditions or after rough transport.
• Do not insert needles, metals or any other objects in the appliance.

USE fOr thE INtENdEd pUrpOSE

The measurement range of the energy cost measuring instrument extends
from 5 to max. 3650 W. Precise measurements are no longer possible out-
side these limits. In addition to that, the appliance will be overloaded and
could be destroyed as a result.
The BX10 has been developed for the monitoring and measurement
of electrical consumers. Although the measuring instrument is very pre-
cise, it is not approved for the billing of electricity costs between electricity
supply companies and consumers.
- The energy cost measuring instrument is approved only for operation
on 230 V AC.
G
- Only appliances with a rated supply voltage of 230 V AC 50 Hz may
be connected.
- The maximum rated power of any connected consumer must not
exceed 3650 watts (max. current 16 A).
- Operation of the energy cost measuring instrument is permitted only
indoors and in a dry environment! Outdoor use is strictly forbidden!
- Always pay attention to the specifications on the rating plate of the
connected load.
- Any use other than that described above will lead to damage to this
product. In addition, this is associated with hazards, such as short
circuit, fire, electric shock etc. The entire product must not be changed
or modified! It is essential to observe the safety instructions.
ApplIANcE IllUStrAtION
Operating manual – Energy cost measuring instrument
B
X 1 0
Plug
LCD display
Operating keys
B
X 1 0
Rating Voltage . . . . 230 VAC, 50/60 HZ
Maximum Load . . . . . . . . . . . . . . 16 A
Power Display. . . . . . . . . 5 VA-3650 VA
Power Calculated Display . . . 0.0 KWH
~999.9 KWH
Plug
B - 2

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Bx 10

Tabla de contenido