Cleaning And Maintenance - Beko HNT61110X Manual De Instrucciones

4

Cleaning and Maintenance

C
Before cleaning and maintenance,
unplug the product or turn off the
switch.
4.1 Cleaning of Aluminium
Grease Filter
Aluminium grease filter is used to retain the
oil particles in the air. Aluminium grease filter
may change colour as it is washed; this is nor-
mal and does not require replacing your filter.
1
(Figure 5)
1- External Aluminium Grease Filter
2- Internal Aluminium Grease Filter
Pull the sliding plate out by holding the
•
front panel. Remove the external aluminium
Grease Filter first, and then the internal al-
uminium Grease Filter .
Push the Aluminium grease filter lock for-
•
ward.
Then lower it slightly down and pull it out
•
(Figure 5). Otherwise, you can bend the fil-
ter. Wash and rinse Aluminium grease filter
s with liquid detergent and replace Alumin-
ium grease filter s to their sockets by by
carrying out the steps specified above in
reverse order. This filter retain the oil par-
ticles in the air.
C
You may wash your Aluminium
Grease Filter s in the dishwasher.
Cooker Hood / User Manual
CAUTION
A
In case of normal use, clean your
aluminium Grease Filter once in a
month.
4.2 Replacement of Carbon
Filters
Odour removing filters contain charcoal
(Active carbon). Aluminium grease filter s
must be installed in the product, regardless of
whether or not carbon filters are used.
2
(Figure 6)
Remove Aluminium grease filter (Figure 5).
•
To remove the charcoal filter, remove the
•
charcoal filter from its housing by rotating
it counter-clockwise from the tab (Figure 6).
Install the new charcoal filter.
•
Install the aluminium Grease Filter s.
•
A
CAUTION
Carbon filter shall never be washed.
A
CAUTION
Replace carbon filters once every 3
months.
A
CAUTION
You can obtain the carbon filter from
the authorized services.
11 / EN