5
Installation Of Appliance
WARNING!
A
Before starting the installation,
read the safety information on User
Manual.
WARNING!
A
Failure to install with screws and sta-
bilizers in accordance with these in-
structions may result in electric shock.
For the installation of the hood, please con-
tact the nearest Beko Authorized Service.
It is the customer' s responsibility to prepare
the location and electrical installation of the
hood.
5.1 Position of the Appliance
(Figure 7)
Distance between the cooker and the
•
cooker hood must be considered prior to
assembly. This distance should be 65 cm
(Figure 7).
Distance must be measured from the sur-
•
face of grate for gas cookers,
from surface of glass for electric cookers.
•
12 / EN
5.2 Installation Accessories
Hood
User manual
HNT61110X
EN-DE-FR-BS-CS-ET-NL-HU-MK-PL-PT-RO-RU-SR-SK-TR-EL-ES-KK-BG
01M-8893093210-0421-05
1. Hood
2. 4x 4 x 40 Screws
3. Operating
Manual
Documents
4. Mounting Template
5. Ø120mm Plastic Flue Flap
The information required to make the location
suitable for the installation of the hood is giv-
en below.
5.3 Installation of the Hood
A
CAUTION
Use protective gloves and goggles
for drilling and cutting operations.
Paste the installing template provided with
•
the hood on the surface where the hood is
to be mounted.
Make holes with Ø4 mm diameter on the
•
points marked as A, B, C, D on the installa-
tion template.
Drill the flue outlet hole specified in the in-
•
stalling template in the sizes given.
Cooker Hood / User Manual
and
Other