Assign An Ip Address - Axis Q1602-E Guia De Instalacion

Ocultar thumbs Ver también para Q1602-E:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

AXIS Q1602-E/AXIS Q1604-E Installation Guide

Assign an IP address

Most networks today have a DHCP server that automatically assigns IP addresses to connected
devices. If your network does not have a DHCP server the network camera will use 192.168.0.90 as
the default IP address.
If you would like to assign a static IP address, the recommended method in Windows is either AXIS
IP Utility or AXIS Camera Management. Depending on the number of cameras you wish to install,
use the method that best suits your purpose.
Both of these free applications are available on the AXIS Network Video Product CD supplied with
this product, or they can be downloaded from www.axis.com/techsup
Method
AXIS IP Utility
See page 12
AXIS Camera Management
See page 13
Notes:
• If assigning the IP address fails, check that there is no firewall blocking the operation.
• For other methods of assigning or discovering the IP address, e.g. in other operating systems, see
page 18.
Recommended for
Single camera
Small installations
Multiple cameras
Large installations
Installation on a different subnet
Page 11
Operating system
Windows
Windows 2000
Windows XP Pro
Windows 2003 Server
Windows Vista
Windows 7

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Q1604-e

Tabla de contenido