Ariston 3318884 Instrucciones De Instalacion Y Uso página 41

5.3 Gateway installation with the
thermoregulation accessory
Once the installation of the thermo-
regulation accessory is done, it is
possible to link it with the Ariston Net
gateway.
Proceed as follows:
1. Open the front panel of the gate-
way by removing the two locking
screws placed at the bottom of
the device (fi g. 1), slightly rotate
the cover (fi g.2) and pull it down
(fi g. 3).
2. Connect the two core cable pre-
viously linked to the thermoregu-
lation accessory to one of the Bus
BridgeNet ports using one of the
orange connectors supplied in
the kit.
1.
3.
220V
BUS BUS
TA1
B T B T
Connection of the gateway with Ariston Sensys
GB
2.
1.
BUS
B T
\ 41