Internet Services Activation; Ariston Service Centres - Ariston 3318884 Instrucciones De Instalacion Y Uso

GB
6.2 Connection through GPRS gateway
When using a GPRS gateway, please follow the procedure below to connect
Ariston Net to internet.
1. Power on the gateway and press the ON/OFF button. For few minutes the
gateway performs its startup procedure, during which all LEDs will fl ash a
blue sequence. At its conclusion, the WEB led remains off , while the BUS
(and SERIAL, depending on the installation") remains on.
2. Once the procedure is done, the WEB led will show the strength of the
GPRS signal as follows
a. Steady blue → Max signal strength
b. Flashing blue → Medium strength
c. Flashing red → Low strength
d. Steady red → No line
Note: we suggest to place the gateway so that the Max intensity of the
GPRS signal is reached. Moreover, it is possible to use the external anten-
na kit, provided by Ariston (code 3318892).
3. Press and hold the start-up button until the WEB led starts to fl ash a green
light: the gateway is now trying to automatically connect to the Ariston
server.
4. If the procedure has been successful, the WEB led will remain green and
the process is complete
Note:
in case of failure (WEB led red), repeat the above procedure starting from
point 3.
Important:
please begin the previously described procedure once the gateway has
been linked to the thermoregulation accessories through the Bus Bridge-
Net protocol, otherwise the gateway won't be able to connect to internet.

7. INTERNET SERVICES ACTIVATION

7.1

Ariston Service Centres

Service Centres certifi ed by Ariston can access to Ariston Net platform typing
their log-in credentials on page:
https://www.ariston-net.remotethermo.com
For further information, please contact the offi cial Ariston Service Centres.
46 /