General Specifications - KPS TC20 Manual De Funcionamiento

KPS-TC20 • Non-contact digital tachometer
- Operation: When you want to store the current rotation speed value, press
the storage key together with other keys, and you can store the current value
to the specified storage number.
• 6) Read key
- Function: Read the rotation speed value under the stored number
- Operation: When you want to store the rotation speed value under a storage
number, press the read key together with other keys, and you can read the
rotation speed value under the stored number.
• 7) Backlight key
- Function: Turn backlight on and off
- Operation: Turn the backlight on when pressing the key the first time. Press
the backlight key again to turn the backlight off.
• 8) Plus key
- Function: Add storage number when reading or storing
- Operation: When entering storage state, press plus key to add the current
storage number
• 9) Minus key
- Function: Subtract storage number when reading or storing
- Operation: When entering storage state, press plus key to subtract the cur-
rent storage number.
6.

GENERAL SPECIFICATIONS

• Rotation speed display is five-digit LCD number with maximum of 99999
• Display 0 below 50 RPM
• Measuring distance is 50mm--250mm (when the battery voltage is sufficient)
• Display voltage lower than 4.5V when batteries are low
• Dimensions: 155mm*60mm*27mm
• Weight: 120g
• Power supply: 4 ×1.5V SIZEAAA battery
• Auto off time is 30 sec.
13