R&S RT-ZC10 Manual Del Usuario página 34

®
R&S RT-ZC10
Fig. 3-1: Front panel of R&S RTO1024
Fig. 3-2: Oscilloscope inputs
2. On the "Vertical" menu, select "Probe Setup".
Fig. 3-3: Access to "Probe Setup"
3. Under "Probe detection", select the "Manual" tab.
Select the "Predefined probe": RT-ZC10.
User Manual 1409.7808.02 ─ 01
Connecting the Probe to R&S Oscilloscopes
Putting into Operation
17