Maintenance And Service; Service Strategy; Returning The Probe For Servicing - R&S RT-ZC10 Manual Del Usuario

®
R&S RT-ZC10
4

Maintenance and Service

4.1

Service Strategy

The R&S RT-ZC10 current probe is a high-precision, high-performance instrument
that extends the limits of today's technological possibilities. Like all Rohde &
Schwarz instruments, the R&S RT-ZC10 current probe is of high quality and
requires only minimum service and repair. However, if the probe needs to be serv-
iced, contact your Rohde & Schwarz service center. Return a defective probe to the
Rohde & Schwarz service center for diagnosis and exchange.
You can return the R&S RT-ZC10 current probe for calibration. The service per-
sonnel will then perform the required tests and readjust the probe, if necessary.
4.2

Returning the Probe for Servicing

Use the original packaging to return the R&S RT-ZC10 current probe to your
Rohde & Schwarz service center.
If you cannot use the original packaging, consider the following:
1. Use a sufficiently sized box.
2. Protect the probe from damage and moisture (e.g. with bubble wrap).
3. Use some kind of protective material (e.g. crumpled newspaper) to stabilize the
probe inside the box.
4. Seal the box with tape.
5. Address the package to your nearest Rohde & Schwarz service center.
User Manual 1409.7808.02 ─ 01
Maintenance and Service
Service Strategy
26