Connecting To R&S Rtm - R&S RT-ZC10 Manual Del Usuario

®
R&S RT-ZC10
Fig. 3-4: "Predefined probe" selection for R&S RT-ZC10
3.2.2 Connecting to R&S RTM
1. Connect the output connector of the R&S RT-ZC10 to one of the BNC input
connectors of the oscilloscope, e.g. to CH1 input. Turn the collar until it clicks,
and check that it is locked securely.
Fig. 3-5: Front panel of RTM
User Manual 1409.7808.02 ─ 01
Connecting the Probe to R&S Oscilloscopes
Putting into Operation
18