Cleaning; Safety Instructions; Cleaning The Housing; Cleaning The Fan Blades - Boneco F210 Instrucciones De Uso

Ocultar thumbs Ver también para F210:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

CLE ANING

SAFETY INSTRUCTIONS

Always unplug the BONECO F210 Air Shower before
you begin cleaning! Failure to do so can result in
electric shock and fatal injury!
Do not use alcohol or corrosive cleaning agents for

cleaning.

Do not run cord under carpeting. Do not cover cord
with throw rugs, runners, or similar coverings. Do
not route cord under furniture or appliances. Arrange
cord away from traffic area and where it will not be
tripped over.
To reduce the risk of fire or electric shock, do not use
this fan with any solid-state speed control device.

CLEANING THE HOUSING

All BONECO F210 Air Shower fans are designed for low-
maintenance operation, even after years of use. In most
cases, a dry cloth can be used for cleaning.
If stubborn dirt is present, clean the housing using a damp
cloth. Add a small amount of dishwashing detergent to
the water.

CLEANING THE FAN BLADES

1.
Tilt the fan unit upwards and loosen the safety
screw.
2. Remove the front grill by turning counterclockwise
slightly.
3. Unscrew the safety screw in the middle clockwise.
4. Remove the fan blades and clean them with a damp
cloth.
5. Put the unit back together by following the steps in
reverse order.
6. Attach the front grill with the safety screw. When
doing so, pay attention to the position of the screw
on the front grill.
11
en

Publicidad

Tabla de contenido
loading

Tabla de contenido