Cleaning; Safety Instructions; Cleaning The Housing; Cleaning The Fan Blades - Boneco F120 Manual De Instrucciones

CLE ANING

SAFETY INSTRUCTIONS

Always unplug the BONECO F120 before you begin
cleaning! Failure to do so can result in electric shock
and fatal injury!
Do not use alcohol or corrosive cleaning agents for

cleaning.

CLEANING THE HOUSING

The BONECO F120 is designed for low­maintenance op­
eration, even after years of use. In most cases, a dry cloth
can be used for cleaning.
If stubborn dirt is present, clean the housing using a damp
cloth. Add a small amount of dishwashing detergent to
the water.

CLEANING THE FAN BLADES

1. Tilt the fan unit upwards and loosen the safety
screw.
2. Remove the front grill by turning it counterclockwise
slightly.
3. Loosen the safety screw in the middle by turning it
clockwise.
4. Remove the fan blade and clean it with a damp cloth.
5. Put the unit back together by following the steps in
reverse order.
6. Attach the front grill with the safety screw. When
doing so, pay attention to the position of the screw
on the front grill.
21
en