Intended Use; Technical Description; Description Of The Device - Dometic WAECO PocketPower SI102 Instrucciones D’uso

SI-102.book Seite 13 Dienstag, 10. November 2009 5:00 17
PocketPower SI102
4

Intended use

The SI102 inverter (item no. 2222600001) can be used to generate a 230 V output from
a 12 Volt power source. The 230 V output can be used to power a 230 V consumer unit
with a power consumption of up to 100 W.
The inverter can also re-charge battery operated devices with a suitable USB port (USB
standard: 5 V, 0.5 A).
The inverter can be applied whenever there is a 12 Vg socket (e. g. a cigarette lighter)
present. Due to the non-sine wave voltage, some devices may heat up. The max.
continuousoutput is 100 W. Never connect devices that have a higher power requirement.
Caution!
e
Note that some devices (such as PSUs and chargers) consume more power on
start-up than stated on the type plate.
5

Technical description

The device has a compact design for portable use. The heat generated during operation
is dissipated by a fan inside the device.
5.1

Description of the device

No. in
Description
fig. 1, page 3
1 Status LED blue
2 Negative contact
3 Positive contact
4 230 V output
5 USB charger connection
Intended use
13