Notes On Using The Manual - Dometic WAECO PocketPower SI102 Instrucciones D’uso

SI-102.book Seite 11 Dienstag, 10. November 2009 5:00 17
PocketPower SI102
Please read this manual carefully before starting up and store it in a safe place. If
passing on the device to another person, hand over this operating manual along
with it.
Contents
1 Notes on using the manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
2 Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
3 Scope of delivery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
4 Intended use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
5 Technical description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
6 Connecting the inverter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
7 Operating the inverter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
8 Care and cleaning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
9 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
10 Troubleshooting checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
11 Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
1

Notes on using the manual

The following symbols are used in this operating manual:
Caution!
a
Safety instruction: Failure to observe this instruction can cause injury or damage
the device.
Caution!
e
Safety instruction relating to a danger from electrical current or voltage. Failure
to observe this instruction can damage the device and/or impair its function and
cause injury.
Note
I
Additional information on operation of the device.
➤
Action: This symbol indicates that action is required on your part. The required ac-
tion is described step-by-step.
✓
This symbol describes the result of an action.
Please also observe the following safety instructions.
Notes on using the manual
11