Before First Use; Assembling The Appliance; Cutting Blades - Silvercrest KM 250 C1 Instrucciones De Uso

WARNING! RISK OF INJURY!
Do not change accessories unless the drive is stationary and the
►
mixer is unplugged from the power supply! The appliance will run on
for a short time after being switched off!
Never leave the appliance unattended!
►
Before changing accessories or additional parts that are in motion
►
during operation, the appliance must be switched off and disconnected
from mains power .

Before first use

■ Remove all packaging materials from the
appliance .
■ Clean the appliance as described in the section
"Cleaning and care" .
■ Ensure that all parts are completely dry before
operating the appliance .

Assembling the appliance

NOTE
► The appliance will not start until the bowl 5
and the lid 3 are correctly attached .
1) Place the motor unit 7 on a flat surface so that
the sucker feet can attach firmly and the
appliance stands firmly in place .
2) Place the bowl 5 onto the motor unit 7 so
that the arrow
towards the open lock symbol
motor unit 7 . Then turn the bowl 5 until the
arrow points to the closed lock symbol
and the bowl 5 clicks into place .
If you want to work with the cutting blades 4,
assemble the appliance as described in the section

"Cutting blades" .

If you want to work with the food processing
attachments, assemble the appliance as described
in the section "Food processing attachments" .
KM 250 C1
on the bowl 5 points
on the
Cutting blades
1) Place the cutting blades 4 onto the drive
shaft 6 . The flattened side of the drive shaft 6
must correctly fit into the take up of the cutting
blades 4 . Otherwise the cutting blades 4
cannot be properly attached .
2) Place the lid 3 onto the bowl 5 so that the
arrow ▼ on the lid 3 coincides with the
arrow and the opened lock symbol
the bowl 5 .
3) Turn the lid 3 until the arrow ▼ on the lid 3
points to the arrow
symbol on the bowl 5 .
4) Place the pusher 1 into the feed tube 2 .
5) Insert the plug into a mains power socket .
on
and the closed lock
GB │ MT │ 35 ■