More About This Unit - JVC KWTC801 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

More about this unit

Basic operations
Turning on the power
• By pressing the source buttons, you can also
turn on the power. If the source is ready,
playback also starts.
Turning off the power
• If you turn off the ignition key without turning
off this unit, the unit will automatically turn
on when you turn on the ignition key next
time. If the last selected source is ready for
playback (ex. a disc or a tape is in the unit),
playback starts automatically.
• If you turn off the power while listening to a
disc, disc play will start from where playback
has been stopped previously, next time you
turn on the power.
Selecting the sources
• When no disc or cassette is loaded in the unit,
"CD" or "TAPE" cannot be selected.
• Without connecting the CD changer,
"CD-CH" cannot be selected.
• Without connecting the interface adapter
(KS-PD100 for Apple iPod), "iPod" cannot be
selected.
Tuner operations
Storing stations in memory
• For AST:
– All previously stored stations are erased and
stations are stored newly.
– Received stations are preset in No. 1 (lowest
frequency) to No. 6 (highest frequency).
– When AST is over, the station stored in
No. 1 will be automatically tuned in.
• When storing a station manually, a previously
preset station is erased when a new station is
stored in the same preset number.
• Preset stations are erased when power supply
to the memory circuit is interrupted (for
example, during battery replacement). If this
occurs, preset the stations again.
18
Disc operations
General
• MP3 and WMA (Windows Media
"tracks" (words "file" and "track" are used
interchangeably) are recorded in "folders."
• This unit has been designed to reproduce
CDs/CD Texts, and CD-Rs (Recordable)/CD-
RWs (Rewritable) in audio CD (CD-DA),
MP3 and WMA format.
• When a disc has been loaded, selecting "CD"
for the playback source starts disc play.
Inserting a disc
• When a disc is inserted upside down, the disc
automatically ejects and the unit starts playing
the last selected source.
• Do not insert 8 cm discs (single CD) and
unusual shape discs (heart, flower, etc.) into
the loading slot.
Playing a disc
• While fast-forwarding or reversing on an MP3
or WMA disc, you can only hear intermittent
sounds.
Playing a CD-R or CD-RW
• Use only "finalized" CD-Rs or CD-RWs.
• This unit can play back only the files of the
same type which is first detected if a disc
includes both audio CD (CD-DA) files and
MP3/WMA files.
• This unit can play back multi-session discs;
however, unclosed sessions will be skipped
while playing.
• Some CD-Rs or CD-RWs may not play
back on this unit because of their disc
characteristics, and for the following causes:
– Discs are dirty or scratched.
– Moisture condensation occurs on the lens
inside the unit.
– The pickup lens inside the unit is dirty.
– CD-R/CD-RW on which the files are
written with "Packet Write" method.
Audio)
®

Publicidad

Tabla de contenido
loading

Tabla de contenido