Group Control - Philips 5906131M7 Manual Del Usuario

Functionality - single button
ON/OFF
Function definition: On/off control
Function description: Turn on/off of the active group downlight (short press the group control
button to select the active group);
Brightness
Function definition: Brightness adjust
Function description: Short press the brightness button to select 3 level of brightness
Light color
Function definition: Light color selection
Function description: Short press the light color button to select one of the three
color temperature

Group control

Function definition: group, ungroup and select active group
Grouping: Within 20 seconds after turn on, press and hold the group control button, the down-
light flash and means grouping success;
Ungrouping: Short press the group control button 5 times, the corresponding downlight will
reset to 2700K 100% brightness, it means ungrouping success;
Select active group: Short press the group control button, the corresponding assigned downlight
will flash, now you can control those active downlight;
Each of the group control button can assign 20 downlights, maximum one remote controller can
control 50 downlights;
Remarks
- Memory function after power off.
- Use the brightness key can control the brightness of the main light and
ON/OFF of the night light.
- Use the light color key to control color temperature.
- In night light mode, the color temperature will not change.
Nightlight
Warm white
1 2 3 4
50% 100%
Cool white
5
Cool daylight