SRU152.qxd 13-01-2005 12:30 Pagina 4
All manuals and user guides at all-guides.com
Instructions for use
Contents
1.
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.
3.
Keys and functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
1. Introduction
Congratulations on your purchase of the Philips SRU152 universal remote
control. After installing the remote control it can operate the most-used
functions of almost any brand of TV.
You can find information about how to prepare this remote control for use in
the chapter 'Installing the remote control'.
2. Installing the remote control
Inserting the batteries
1
Press the cover inwards and slide it in the
direction of the arrow.
2
Place two R03, UM4 or AAA type batteries
into the battery compartment, as shown.
3
Slide the cover back and click it firmly into
place.
Testing the remote control
The remote control has been programmed to operate the most-used
functions of almost any brand of TV. Because the SRU152 may use different
signals for each make and even for different models of the same make,
it is advisable to test whether your TV responds to the SRU152.
The example below instructs you how to do this.
1
Turn your TV on manually or use the original remote control.
Tune to channel 1.
2
Check whether all the keys are working.
For an overview of the keys and their
functions see '3. Keys and functions'.
-
If the TV responds as it should to all of the
key commands the SRU152 is ready for use.
•
If the device does not respond at all or not to all of the key
commands, follow the instructions under 'Setting the remote
control'.
4