Bimar VPS56 Folleto De Instrucciones página 13

ASSEMBLY
Attention: the fan can be used only when completely and correctly assembled,
that is complete with its base and support and protection grid.
Attention: always unplug the appliance before you assemble.
If in doubt, have the appliance checked or assembled by a qualified professional
person. Take figures as a reference for assembly.
 Fix the pole (H) to the base (B) and to the counterweight (G) by inserting it into
its seat, with the screw (I). At the end of the work, make sure that auction and
the base (with counterbalance) are firmly united.
 Lengthen the adjustable column (N) to the desired height and fasten the ring
so tight fixing column (J).
 Place the "head of the fan" column adjustable, so as to fix the support (M)
column with the two junction plates (L), combine the two plates and secure
them with the 4 screws, 4 washers and 4 nuts (K). At the end of the work, make
sure the support column and are firmly united.
A. Motor body
B. Base
C. Selectors
D. Cable electric
E. Carrying Handle
F. Cord storage
G. Counterweight
H. Fixed shaft
I. Screw "L" with washer
J. collet column
K. Screws fastening plates
L. Platelets junction
M. Support
N. Adjustable column
13/36