Technical Data - AEG FAVORIT 55000 VI Manual De Instrucciones

Problem
There are streaks, whitish
stains, or a bluish layer on
glasses and dishes.
Dry water drop stains on
glasses and dishes.
The dishes are wet.
The dishes are wet and matt.
Activating the rinse aid dispenser
1. Activate the appliance.
2. Make sure that the appliance is in setting mode.
3. Press and hold function buttons (B) and (C) at the same time until the indicators of
function buttons (A), (B) and (C) flash.
4. Release function buttons (B) and (C).
5. Press function button (B).
• The indicators of function buttons (A) and (C) go off
• The indicator of function button (B) continues to flash
• The display shows the setting of the rinse aid dispenser.
6. Press function button (B) to change the setting.
7. Deactivate the appliance to confirm.

TECHNICAL DATA

Dimensions
Water supply pressure
Possible cause
The rinse aid quantity is too
high.
The rinse aid quantity is too
low.
The detergent can be the cause. Use a different brand of deter-
The washing programme was
without a drying phase or
with a decreased drying phase.
The rinse aid dispenser is emp-
ty.
The multitab function is on
(this function automatically
deactivates the rinse aid dis-
penser).
Rinse aid dispenser is off.
Rinse aid dispenser is on.
Width
Height
Depth
Minimum
Maximum
Technical data
Possible solution
Decrease the rinse aid quantity.
Increase the rinse aid quantity.
gent.
For better drying results, keep
the door ajar for some minutes.
Fill the rinse aid dispenser with
rinse aid.
Activate the rinse aid dispenser.
818 - 898 mm
0,5 bar (0,05 MPa)
8 bar (0,8 MPa)
21
596 mm
550 mm