Important - Perry TE526 Manual Del Usuario

4 - USER INSTRUCTIONS
4.3 - CHANGING the T Set
From the current mode
you can change the T
T Set
S e t t e m p e r a t u r e
setting by pressing the
ON
or button. The
new setting is saved
instantly.
Mode
Every time the or button is pressed, the temperature will change
by 0.1 degree. Keep either button pressed to activate the rapid scroll.
Note: The maximum and minimum temperature settings can be blocked
(refer to the PROGRAMMABLE FUNCTIONS chapter).
Or:
Example:
Press the Mode
b u t t o n o n c e o r
repeatedly until the
T Set
desired operation
mode is displayed.
ON
within 5 seconds:
Press the or
Mode
button to vary
the T Set value.
1° 2°
5 seconds after the last button is released, the thermostat
resumes in the previous mode.
Note: anti-freeze temperature has been excluded (refer to the
PROGRAMMABLE FUNCTIONS chapter), the user cannot
change the anti-freeze temperature setting.
TEMPERATURE SETTING
OK
OK
3°

IMPORTANT!

The thermostat accepts a T Set
to 37.0 °C with temperature values that satisfy the following
conditions:
Winter: the "Comfort" temperature setting greater than or
equal to the winter "Reduction" temperature.
Summer: the "Comfort" temperature setting less than or
equal to the summer "Reduction" temperature.
The following are the default
Winter mode ( heating
Comfort temperature 20.0 °C
Boiler operation with the room temperature lower than 20.0 °C
Winter night-time reduction:
"Reduction" temperature 17.5 °C
Boiler operation with the room temperature lower than 17.5 °C
Summer mode ( cooling
"Comfort" temperature 25.0 °C
Air-conditioner operation with the room temperature greater than 25.0 °C
Summer night-time reduction:
"Reduction" temperature 28.0 °C
Air-conditioner operation with the room temperature greater than 28.0 °C
Thermostat off
from winter mode "Antifreeze" temperature 4,0 °C (Adjust/exclude)
- Boiler functioning on room temperature less than 4,0 °C
- Air conditioning off
temperature range from +5 °C
T set temperature settings:
):
):
EN EN EN
29