Filling With Automatic Device; Manual Filling - Lotus PFDG Serie Manual De Instruciones Para El Uso

2.5. HOW TO FILL THE VAT WITH WATER
2.5.1.

Filling with automatic device :

− Enable the water inlet, selecting either hot or cool water. Press
water and
− The upper display will show the following image:
− Use
the vat. The selected value appears on the lower display.
Warning! : The last set value will be stored in the memory.
− Then, press this button
litres will be displayed on the lower display. Once the selected quantity is reached,
the delivery of water will be automatically stopped. To visualize the set litres, press
the button for the selected type of water (hot or cold) (the corresponding LED will
flash). The quantity of set litres is displayed for about 3 seconds.
If filling needs to be interrupted in advance, press
2.5.2.

Manual filling:

Warning! : Manual Operation only with a 0 value.
− Enable the water inlet, selecting either hot or cool water. Press
water and
− Use
automatic load cycle of water. The value appears in the lower display.
− Then, press
value is reached.
− Releasing this button will automatically and immediately stop the delivery of water.
Instruction manual and use
Kettles PF..
for hot water and the corresponding LED will go on accordingly.
to select the value corresponding to the litres of water required in
to deliver the set quantity of water to the vat. The set
for hot water and the corresponding LED will go on accordingly.
to set this value to 0. This value will be displayed after an
to deliver water to the vat. Keep it pressed until the desired
(pushbutton led off).
GB-PF-DU-02
Pag
for cool
for cool
14 di 18