Refrigerator Installation; Step 1 - Unpack Refrigerator - Haier HC17SF10R Manual De Instalación Y Del Usuario

REFRIGERATOR INSTALLATION

STEP 1 - UNPACK REFRIGERATOR

Do not puncture refrigerant tubing.
Follow handling instructions carefully.
Flammable refrigerant used.
Failure to do so can result in death, explosion or re.
IMPORTANT: Handle with care when moving to avoid either damaging the
refrigerant tubing or increasing the risk of a leak.
IMPORTANT: When moving, never tilt the refrigerator more than a 45° angle. This
could damage the compressor and the sealed system. If the refrigerator has been
placed in a horizontal position for any period of time, wait 24 hours before plugging
in the refrigerator to allow the refrigerant to settle.
1. Remove and dispose of/recycle all packing materials. This includes the foam
base and all adhesive tape. Remove all protective packaging covering the
product.
2. Remove user manual and other printed material before turning on the
refrigerator.
3. Clean the exterior surface with a soft cloth.
8
WARNING
Fire or Explosion Hazard