4.5) PHONE BOOK - LOOK FOR DATA TO CANCEL OR MODIFY
↑
PHONE BOOK
↵ CONFIRM
↓
PHILIP
01
↵ 555666777888999
↑
PHONE BOOK
↵ CONFIRM
↓
PHILIP
01
↵ 555666777888999
Attention! Checking telephone line: in accordance with Standards, the control unit controls for the tone indicating a free PSTN line and
makes the call only if this tone is correct.
programming phase (press ↑ ).
Attention! Space between numbers: if a space is to be placed between the numbers press ↓ between one number and the next.
4.6) MESSAGES - RECORDING/WRITING AND MODIFICATIONS
↑
MESSAGES
↵ CONFIRM
↓
Press ↵ during recording and look
at timing - the total time for all
vocal messages is 240 seconds.
(please speak near microphone)
You can confirm (↵) the
alarm message for all ABC
groups or one-two groups
only by pressing 1,2,3 (see
DETAILS)
Now you can go on to record
all the 6 alarm messages
and the 7th message (user
guide for phone controls)
4.6.1) VOCAL MESSAGE 7: if there are no home automation operations just record how to perform the control operations:
- to check the status of the control unit (armed/disarmed) press zero and gate (#)
- to arm the control unit fully press zero ∗ 1 #
- to only arm zones A+B press zero ∗ 2 #
- to disarm press zero ∗ zero #
If remote home automation operations are envisioned (switching on lights, controlling electrical appliances) the various commands must be
recorded as follows according to the operations realised: see 3.3.1 and 3.3.4.
4.6.2) EVENT MESSAGES (this phase does not appear on the menu if the control unit has 30029 board)
The control unit "speaks" in real time, informing the user via pre-recorded messages that recordings must be made which are as easy to
understand as possible: not recording these messages means loosing the vocal indications of the peripheral, even if recorded. Proceed as
follows
VOCAL MESSAGES ↑
↵
↓
CONFIRM
Speak close to the
microphone holding ↵ down.
Check residual time (total
240 sec.)
SILENTRON spa – 10139 – Via Sagra S.Michele 25 Torino - ITALIA
↵
↑
MEMORY
↵ CONFIRM
↓
01
Confirm (↵) - erase (CANC) or
modify (←) the name and/or the
number.
↑
↵
MEMORY
↵ CONFIRM
↓
01
Confirm (↵) - erase (CANC) or
modify (←) the name and/or the
number.
If the line tone is disturbed, checking can be cancelled by inserting ∗ in front of the number in the
VOCAL MESSAGES ↑
↵
↵ CONFIRM
VOCAL RECORDING
240 . 239 . 238 . 237 . . . .
VOCAL MESSAGES ↑
↵
↵ CONFIRM
DETAILS :
it is possible to send the message after an alarm in one or more zones; for example in case of
external alarm in zone A, it is possible to avoid phone transmission by excluding the zone (press 1). You
↵
can also change the event (¯). Please look at ADVANCED PROGRAMMING
SMS WRITING : going on in the same mode you can write the SMS. When VOCAL MESSAGES is
displayed you can find SMS MESSAGES by ↑↓ buttons.
MESSAGE / EVENTS ↑
↓
↵
↓
CONFIRM
RECORDING
↵
240 . 239 . 238 . 237 . . . .
↑
SEARCH NAME
↓
CONFIRM
VOCAL MESSAGES
↵
↵
- 2 3 - - 6
↑
SEARCH POSIT.
↓
CONFIRM
VOCAL MESSAGES
↵
↵
- 2 3 - - 6
VOCAL MESSAGE 1 ↑
↵
↓
↵ CONFIRM
Leave ↵ to stop recording and
listen automatically the message.
Now you can escape (ESC),
repeat listening (↵) or erase
(CANC) and repeat recording
VOCAL MESSAGE 1 ↑
↵
↓
↵ CONFIRM
ARMING
↵
↵
CONFIRM
Release↵ at the end and listen.
Press ESC to escape, ↵ to listen
again or CANC to cancel and
record again
COPYRIGHT SILENTRON DS5500/1/2/3XC100120GM
↵
ADD NAME
PHILIP
Confirm (↵) or modify (1,2,3,4,5,6)
the jointed vocal, SMS and
technical messages (see 2.2.7) as
well as entering operation
ADD
↵
POSITION
Confirm (↵) or modify (1,2,3,4,5,6)
the jointed vocal, SMS and
technical messages as well as
entering operation
↵
VOCAL RECORDING
↓
↵
TO RECORD
E
VOC. EVENT 1
S
GROUP AL.
C
VOCAL MESSAGE 2 ↑
↓
↓
↵ CONFIRM
↑
ARMING
↵
↵ TO RECORD
↓
E
ARMING
S
↵
CONFIRM
C
↵
↵
↑
↓
01
↵
↵
↓ ↑
?
A B C
↵
↓
↵
↑
↓
↓
30