How To Use; Cleaner Descriptions; Polarized Plug - Hoover Elite Rewind UH40070 Manual Del Propietário

1-6

2. How to use

Cleaner description
2-1
1
1 1
10

Polarized plug

To reduce the risk of electric shock, this
appliance has a polarized plug (one
blade is wider than the other). This plug
will fit in a polarized outlet only one way.
If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit,
contact a qualified electrician to install
the proper outlet. Do not change the
plug in any way.
4
Wrap hose over hook (I).
Push hose end (J) firmly onto tube (K) as
I
shown.
J
K
2
3
4
5
6
1 9
7
8
1 8
9
2-2
A
ON-OFF pedal
Grasp end of plug (A) and pull to
desired cord length. Plug cord into elec-
trical outlet.
To turn cleaner ON, step on ON/OFF
pedal (B) once.
To turn cleaner OFF, step on pedal
again.
1. Handle grip
2. Dirt cup release button
3. Carrying handle/Dirt
cup handle
1 2
4. Air flow indicator
5. Dirt cup assembly
1 3
6. Long lasting HEPA
filter
1 4
7. Headlight
8. Nozzle control knob:
1 5
turn knob to correct
setting for height of carpet
being cleaned.
1 6 9. Furniture nozzle: helps
prevent cleaner from
marking furniture.
10. Cord reel
1 7
11. Cord rewind button:
press button to rewind cord
for storage. Hold plug
until cord is rewound.
12. Cord hook
13. Hose
14. Hose holder
15. Combination tool
16. Crevice wand
17. Hose handle
18. ON/OFF pedal
19. Handle release pedal:
step on pedal to lower handle to
operating or low positions.
Operate cleaner only at
voltage specified on data
plate on back of cleaner.
This cleaner is intended for
household use.
2-3
B
Cord rewind
Grasp the end of the plug and pull
to release cord from cord reel. After
desired cord length is reached, the cord
will lock into position.
To return cord for storage, hold plug
and press on button (C) at top of cord
reel. To prevent cord from whip-
ping, hold plug until cord is
rewound.
C
Continued >>