Assembling Cleaner; Carton Contents; Attach Handle - Hoover Elite Rewind UH40070 Manual Del Propietário

If you need any assistance:
Visit our website at hoover.com. Click on the "Service" button to find the service outlet nearest you OR
Call 1-800-944-9200 for an automated referral of authorized service outlet locations (U.S. only) OR
Call 1-800-263-6376 to speak with a representative in our Consumer Response Center.
Please do not return this product to the store

Assembling cleaner

Carton contents

1-1
A
1-2
A

Attach handle

Slide handle section (A) onto back of
handle.
1-5
LOCK
Position hose
Align end of hose with projections over
slots in dirt duct on back of cleaner.
Twist to lock in place.
The hose connector allows the hose to
swivel.
Di
B
1-3
Push screw into hole on back of
handle. Tighten screw securely with a
Phillips screwdriver.
LOCK
.
C
A. Handle section and screw (taped
to handle)
B. Cleaner body
C. Cleaning tools
D. Hose
Remove all parts from carton and
identify each item shown.
D
Make sure all parts are located before
disposing of packing materials.
1-4
D
Place combination tool (D) into opening
on back of handle.
The crevice wand (E) slides over the
post (F) on the back of the cleaner.
E
F
3