Appendix; Technical Data; Notes On The Declaration Of Conformity - UNITED OFFICE ULGD 350 A1 Instrucciones De Uso

Appendix

Technical data

GB
MT

Notes on the Declaration of Conformity

54
Operational voltage
Current consumption
Power consumption
Protection class
Pouch width
Pouch thickness for hot lamination
Pouch thickness for cold lamination
Lamination times
Pouch thickness switch
Sheet size
position: 80 Micron
DIN A4
DIN A5
Overheating protection
This appliance is fi tted with an overheating protector. If the motor overheats
due to overloading, the appliance switches itself off automatically. In this case,
disconnect the power cable and wait until the appliance has cooled down to
room temperature. You can then reconnect the power cable with a mains power
socket and take the appliance back into operation. We recommend that you let
the appliance cool down for about 30 minutes after 2 hours of operation.
This appliance complies, in regards to conformance with
the basic requirements and other relevent regulations, with
the EMC Directive 2004/108/EC, as well as the Directive
for Low Voltage Devices 2006/95/EC.
The complete original Declaration of Conformity can be
obtained from the importer.
220 - 240 V ∼, 50 Hz
max. 125 Micron
max. 200 Micron
Pouch thickness switch
approx. 40 s
approx. 29 s
1.6 A
350 W
II/
max. 230 mm
position: 125 Micron
approx. 51 s
approx. 36 s
ULGD 350 A1