EXTENDED WARRANTY
Available in U.S. only. Extend your warranty for an additional 4 years
from date of purchase for $5. You can pay with AMEX, Discover, Visa or
MasterCard by calling 1 800-448-4639 during normal business hours.
Payment must be made within 30 days of purchase. Name, address,
telephone number, purchase date, and 5-digit model number required. You
can also mail a check for $5 to: Timex Extended Warranty, P.O. Box 1676,
Dept. EF, Little Rock, AR 72203.
Please read instructions carefully to understand how to operate your Timex
watch. Your model may not have all of the features described in this
booklet.
FUNCTIONS
Real-time calendar clock, Second time zone, Countdown timer, Daily/
weekday/weekend alarm, hourly chime, Chronograph with lap/split storage,
INDIGLO
night-light with Night-Mode
®
BASIC OPERATION
Model Number: 055
SET OR DONE
(To save changes
and exit setting)
MODE OR NEXT
(Proceed to
next step)
INDIGLO
When setting, each button has a different function as indicated above.
Watch face will indicate when button changes function.
TIME/DATE/HOURLY CHIME/TIME ZONE
1. In TIME mode, press and hold
2. To set, push
or
to select first or second time zone.
+
–
3. Press
. Hour digits flash.
NEXT
4. Press
or
to change hour including AM/PM. (Scroll through 12 hours to
+
–
get to AM/PM).
5. Press
. Minute digits flash.
NEXT
6. Press
or
to change minutes.
+
–
7. Press
. Second digits flash.
NEXT
8. Press
or
to set seconds to zero.
+
–
9. Press
. Day of week flashes.
NEXT
10. Press
to
to change day.
+
–
11. Continue pattern to set month, day of month, 12-hour or 24-hour time
display, MMM.DD or DD-MMM date format, turn hourly CHIME on/off,
turn BEEP on/off. If you select BEEP on, a beep will sound every time you
push a button (except INDIGLO
12. Press
to confirm and exit or
DONE
time zone, if desired.
13. When in Time mode, press and hold
time zone; hold for 4 seconds to switch time zones.
CHRONO
LAP 1 = 7.11
LAP 2 = 7.50
SPLIT 1 = 7.11
SPLIT 2 = 15.01
feature.
®
START/SPLIT OR +
(Increase value. Hold
to increase rapidly.)
STOP/RESET OR –
(Decrease value.
Hold to decrease
rapidly.)
BUTTON
®
. Time zone will flash.
SET
).
®
to continue and set second
NEXT
to "peek" at second
START/SPLIT
LAP 3 = 7.08
LAP 4 = 7.30
SPLIT 3 = 22.09
SPLIT 4 = 29.39
1. Press
until CHRONO appears.
MODE
2. Press and hold
.
SET
3. The Display will read: FORMAT/SET, then LAP/SPL or SPL/LAP. CHR
indicator will appear.
4. Press
or
to select desired format.
+
–
5. Press
to confirm and exit.
DONE
6. To use chrono, press
®
exit the mode.
7. Press
STOP/RESET
running, press
START/SPLIT
be displayed in the format you selected. The lap number will alternate
with the last two digits of the bottom line.
NOTES:
• Lap and split times will appear frozen for 10 seconds. Press
release the display and see running chrono.
• Press and hold
STOP/RESET
TIMER
1. Press
repeatedly until TIMER appears.
MODE
2. Press
. Hour digits flash.
SET
3. Follow same pattern as setting TIME and ALARM to set hours (up to 24
hrs.), minutes, seconds, and select between REPEAT/AT END (timer
counts down and then repeats) or STOP/AT END (the timer counts down
and then stops).
4. Press
to confirm and exit.
DONE
5. Press
START/SPLIT
exit Timer mode. If REPEAT/END selected will flash. If STOP/END selected
will flash. Sub-dial rotates in counter clockwise direction when Timer is
running.
6. An alarm melody will chime and INDIGLO
timer has reached zero or before it starts to count down again.
7. Press
STOP/RESET
ALARM
Setting the ALARM is similar to setting TIME. Your watch model has three
alarms. Follow below procedure to set each alarm.
1. Press
repeatedly until ALM1, ALM2, or ALM3 appears. Select
MODE
alarm you want to set.
2. Press
to set alarm.
SET
3. Hour digits flash. Press
4. Press
. Minute digits flash. Press
NEXT
5. Press
. If in 12-hour format, AM/PM flashes. Press
NEXT
6. Press
. Press
NEXT
+
7. Press
to confirm and exit.
DONE
8. Press START/SPLIT or
disarmed, OFF will be displayed. When armed, the alarm indicator will
appear under ALM.
9. The INDIGLO
night-light and alarm icon flashes and an alert sounds
®
when the alarm goes off. Press any button to silence. A back up alarm will
sound after five minutes if you don't press any buttons.
INDIGLO
NIGHT-LIGHT WITH NIGHT-MODE
®
Press INDIGLO
button to illuminate watch display for 2 - 3 seconds (5 - 6
®
seconds while setting). Electroluminescent technology used in the INDIGLO
night-light illuminates entire watch face at night and in low light conditions.
Any button pressed while INDIGLO
Press and hold INDIGLO
feature. Moon icon P will appear in Time mode. Feature causes any button
press to activate INDIGLO
may be deactivated by pressing and holding INDIGLO
seconds, or it automatically deactivates after 8 hours.
1
ENGLISH 055-095000
. Chrono continues to run even if you
START/SPLIT
to stop chronograph from running OR while chrono is
to take a split. Lap and split times will then
to reset chronograph.
to start TIMER. Timer will continue to run even if you
night-light flashes when the
®
to stop TIMER. Press again to reset countdown time.
or
to change hour.
+
–
or
to change minutes.
+
–
or
to select DAILY, WEEKDAYS OR WEEKENDS.
–
to arm or disarm alarm. When
STOP/RESET
night-light is on keeps it on.
®
button for 4 seconds to activate NIGHT-MODE
®
night-light for 3 seconds. NIGHT-MODE
®
®
to
MODE
or
to change.
+
–
FEATURE
®
®
®
feature
®
button again for 4