Flash Interception; Type Of Monitor To Be Combined With The Telephone - Bpt IT/200 Manual De Instrucciones

Flash interception

Lift the receiver
or
press the hands-free key.
Following this operation, a double tone
should sound, prompting you to commence
programming.
3 Key in 63.
6
Press 0 to disable flash
0
interception (connection to
XT/200 telephone)
or
1 to enable flash intercep-
1
tion (connection to generic
DTMF telephone).
Once finished, you should hear a triple tone
confirming the setting.
Replace the receiver
or
press the hands-free key.
PROGRAMMING
Type of monitor to be combined
with the telephone
Following this operation, a double tone
should sound, prompting you to commence
programming.
NOTE. In systems with mixed extensions,
press 1.
Once finished, you should hear a triple tone
confirming the setting.
33
Lift the receiver
or
press the hands-free key.
4
6 Key in 64.
Press 0 when using XV/200
0
or XVC/200 monitor
or
1 when using IMT/200 or
1
IMTC/200 monitor.
Replace the receiver
or
press the hands-free key.