Telephone Auxiliary/Stair Light Control; Disabling The Incoming Call Warning Tone; Accessing In Dtmf Services Of Telephone Company - Bpt IT/200 Manual De Instrucciones

Telephone
auxiliary/stair light control
Lift the receiver
or
press the hands-free key.
Wait for the dial tone.
Press the auxiliary key (in the
case of bpt telephones; for
other telephones, consult the
summary table).
Replace the receiver
or
press the hands-free key.
NOTE. If the interface is programmed with
the FLASH INTERCEPTION function disa-
bled, the control will not work using a DTMF
set whilst communicating on the local
telephone line.
WARNING. In installations featuring con-
versation privacy, this control is only availa-
ble if the extension has been called from the
entry panel.
FUNCTIONS
Disabling the incoming
call warning tone
R
The warning tone will remain disabled for
the entire duration of the call.
Use this function when a modem connec-
tion is made. If you want the disabling to be
automatic, add the series of digits
the software instructions for the telephone
connection).
Accessing in DTMF services
of telephone company
Access is always possible when the interfa-
ce's FLASH INTERCEPTION is disabled,
whilst it is only possible during communica-
tion with the local telephone line, with no
incoming call from the entry panel, when
the FLASH INTERCEPTION is enabled.
40
Key in R83 before dial-
8 3
ling the telephone num-
ber.
!83, (see